๐Ÿ“ Auckland, New Zealand โœ‰ info@foodverification.co.nz ๐Ÿ“ž 0221281203
New Zealand-wide service Free Initial Guidance โ†’

RMP and Food Act Activities on One Site: Map the Boundaries Before Expanding

21 November 2026  ·  RMP & Animal Products Compliance

Two idle food-production rooms separated by an internal glass partition and door.

Adding an activity to an existing RMP site? Review AFVA’s RMP compliance support or contact AFVA for free initial guidance.

RMP and Food Act activities can raise difficult boundary questions when a New Zealand food business expands. A new product may use the same staff, equipment and dispatch area while requiring a fresh assessment of programme coverage. The street address alone cannot determine the answer.

This guide helps an operator prepare the facts before asking which arrangement fits. It does not decide a particular product’s classification, require two registrations for every mixed site or imply that an existing Risk Management Programme automatically covers everything made there.

Quick answer. Map the current and proposed activities by product, process, legal operator, premises and intended market. Identify which activities are demonstrably covered now, which are proposed additions and where controls are shared. Then confirm the appropriate RMP/Food Act pathway and any evaluation, amendment or registration steps with the relevant recognised people and authority before relying on the new arrangement.

Start with activities rather than the building’s label

Write down what each part of the business actually does. Describe incoming materials, processing, packing, storage, distribution and sales, including who operates each activity and which products and markets it serves. Identify what is changing rather than describing the whole proposal as ‘more of the same’.

MPI’s RMP development guidance describes programme scope in terms of the products, processes, premises and operational coverage. Its guidance also explains that non-animal product foods can, in appropriate circumstances, be included in an RMP.

That is a conditional option. It does not mean every food made in an animal-product factory belongs under the same programme. For the broader initial-pathway discussion, use AFVA’s RMP consultant guide. Here, keep attention on the interface between existing coverage and the proposed activity.

Prepare a current-and-proposed activity map

Use the actual registration, scope and controlled programme as the starting evidence. Put proposed work in a separate section so a reviewer can distinguish an existing authorisation from a future plan. The following fields are an AFVA preparation recommendation, not a prescribed MPI form.

Three boundaries to make visible

Boundary

Product and process

Record

Materials, product type, operations, intended use and market for each activity.

Question

Which current programme provisions demonstrably cover the proposed work?

Boundary

Operator and premises

Record

Who operates the activity, where it takes place and which rooms or equipment it uses.

Question

Does the proposed responsibility and physical scope match the existing registered arrangement?

Boundary

Shared controls

Record

Common cleaning, allergen, traceability, stock-status and dispatch arrangements.

Question

Who controls the interface, and which evidence will demonstrate that it works?

Treat the programme options as options to assess

MPI’s guidance on including non-animal product foods in an RMP discusses several possible arrangements. These include an RMP incorporating appropriate Food Control Plan or National Programme components, a Food Act arrangement where the activities are eligible, or separate RMP and Food Act registrations.

Eligibility depends on the complete activities and intended markets. The guidance is particularly relevant where animal and non-animal foods use similar processing methods. A product being vegetarian does not establish that it can simply be added to a particular RMP, and handling an animal ingredient does not by itself settle every regulatory pathway.

Ask the RMP verifying agency and evaluator about the relevant technical expertise and scope. If more than one arrangement is needed, identify who maintains each one and how the shared systems will be controlled. Do not choose the pathway solely because one document appears cheaper or easier to administer.

Examine the shared equipment and information handovers

A boundary drawn on a plan needs to work during production. Identify where ingredients, people, utensils, packaging, rework, waste and finished stock cross between activities. Consider the effect on existing controls as well as the hazards associated with the new food.

MPI’s inclusion guidance identifies matters such as revised hazard analysis, relevant limits, prerequisite programmes, validation where needed, cross-contamination controls, records and non-compliant product arrangements. Its purpose is to establish a suitable programme, rather than add a product name to a cover sheet.

For example, a proposed non-animal product may introduce an allergen to equipment already used for another product. That hypothetical change needs an assessment of the actual materials, cleaning and production arrangement. This article supplies no allergen-control method or conclusion that the shared line is suitable.

Link the affected procedures to named owners. A common cleaning procedure can support more than one activity, but the product-specific application and evidence still need to be clear. Likewise, one dispatch team needs an understandable way to identify product status and destination requirements.

Resolve the change route before commissioning the expansion

Compare the proposed activity with the registered RMP and identify the formal question early. MPI’s current RMP amendment guidance distinguishes minor and significant amendments and describes evaluation and registration for significant changes. The affected parts of the programme need consideration.

The fact that an expansion stays in the same building does not make it minor. Equally, this guide does not classify every new product or layout adjustment as significant. Get the actual assessment, applicable conditions and implementation point confirmed before treating the new activity as covered.

Use AFVA’s RMP significant-change review guide for preparing that separate amendment brief. Retain the advice and decision, including its assumptions. An application submitted, a completed consultant’s draft and a registered amendment are different stages.

Keep export and specialist scope questions separate

Record the intended destinations and whether relevant animal products need official assurances. MPI’s inclusion guidance treats market requirements and the protection of existing animal-product assurance arrangements as important considerations. Incorporating another food into an RMP is not a blanket export approval.

Ask which evaluator and verifying agency have the appropriate expertise for all affected activities. An existing relationship may cover the current work without covering the proposed technology or product. Identify specialist questions explicitly, such as whether existing validation evidence applies to the new operating conditions.

If the business uses a regulated control scheme, do not assume the same RMP inclusion option applies. MPI’s non-animal inclusion guidance distinguishes RMPs from those schemes. Obtain advice about the actual arrangement rather than changing the programme label to fit the project.

Use this checklist for the first review discussion

  • Current registrations, scope, conditions and controlled programme are available.
  • Each existing and proposed activity is described separately.
  • Operators, premises, products, processes and intended markets are identified.
  • Shared equipment, people, material flows and control responsibilities are mapped.
  • Effects on hazard analysis, supporting programmes and evidence are listed.
  • Relevant verifier, evaluator and authority questions are written down.
  • Required decisions and conditions are distinguished from project target dates.
  • Document updates, staff instructions and implementation checks have owners.

Common mistakes include assuming the address establishes coverage, treating a product description as the complete activity scope, cancelling one registration before the replacement position is clear, and assuming one provider can perform every formal function. Keep unresolved questions visible until the appropriate decision is recorded.

AFVA can help organise the activity description and documentation questions within an agreed consulting scope. Regulatory decisions, evaluation and recognised verification retain their separate roles and independence requirements.

Frequently asked questions

Does a mixed animal and non-animal food site always need two registrations?

No universal answer follows from that description. MPI describes conditional options, including appropriate non-animal food components within an RMP and separate arrangements. Assess the actual activities, eligibility and markets with the appropriate parties.

Can our existing RMP automatically cover a new vegetarian product?

Do not assume automatic coverage. Compare the product and process with the registered scope, assess hazards and shared controls, and confirm any required amendment, evaluation or registration steps.

Does a shared room mean the programmes must be combined?

The physical arrangement is relevant evidence, but it does not decide the pathway by itself. Responsibilities, process scope and control of shared activities still need assessment under the appropriate arrangement.

Can the same agency verify every activity?

Only if the applicable recognition, technical expertise and arrangements support that work. Check the proposed coverage rather than assuming an agency’s current role extends automatically to new activities.

Should we cancel our Food Act registration when planning inclusion in an RMP?

Confirm the required sequence and effective coverage with the relevant authorities first. A proposal to include activities is not evidence that the replacement arrangement is complete or that existing obligations have ended.

How AFVA can help

Bring AFVA a one-page activity map, current scope, proposed change and intended markets. A focused discussion can identify gaps in the factual brief and the questions to take to the relevant evaluator, verifying agency or registration authority. Agree scope and independence before commissioning support.

General information only. Confirm the requirements that apply to your specific food activities, products, processes, locations and sales model.

Need Practical Food Safety Support for Your Business?

Contact us for free initial guidance. We provide practical, plain-English food safety support for New Zealand food businesses across all service areas.

This article provides general information only and is not a substitute for professional advice specific to your situation. Contact us for guidance based on your actual food activities and requirements.

More Articles