๐Ÿ“ Auckland, New Zealand โœ‰ info@foodverification.co.nz ๐Ÿ“ž 0221281203
New Zealand-wide service Free Initial Guidance โ†’

Custom Food Control Plan Evaluation NZ: How to Respond to Evaluator Feedback

08 November 2026  ·  Food Control Plans & Verification

A food safety manager comparing two versions of a plan with a supporting evidence folder.

A recognised evaluator reviewing a custom Food Control Plan (FCP) may ask which products a procedure covers, how a control was validated or why a form differs from the written plan. A useful reply shows exactly what changed and where the evidence can be found. An organised response also helps you keep track of questions that still need a decision.

Quick answer. Give each evaluator comment an issue number. Record your response, the revised plan page or supporting evidence and the status. Ask the evaluator to confirm which items need resolution before the application and which can be followed up later. Track any conditions MPI imposes separately and make sure staff get the final controlled procedures.

Check what the evaluator is asking you to show

MPI’s March 2026 guide to evaluation and verification explains that an evaluator checks whether the proposed plan covers your scope, hazards, controls, facilities, equipment and relevant validation. During that assessment the evaluator may identify changes, ask for evidence or advise which issues can be dealt with later. Read each question alongside the version they reviewed. Check whether it concerns a missing document, unclear wording, a discrepancy with the site or a gap in the evidence. Ask for clarification before making a large change based on an ambiguous comment.

If you are still assembling the plan or choosing an evaluator, see how custom Food Control Plan evaluation works.

Reply issue by issue and show the evidence

Keep a response log with one row per issue. This is a practical way to organise your reply. Agree the format with the evaluator if they supply their own.

  • Issue and reference. Copy the comment or reference, its date and the plan version under review.
  • Response and revised location. Say what changed or why the original text applies. Name the document, version, section and page.
  • Evidence. Point to the matching drawing, process record, specification or technical report. Explain what it supports.
  • Status and owner. Mark submitted, awaiting feedback or open. Identify who will obtain any outstanding evidence and by when.

For example, the evaluator asks how packed product stays separate from ingredients during a shared packing shift. The operator identifies the original diagram, explains the actual workflow and updates both the diagram and the relevant procedure. The reply points to the new versions and asks the evaluator to confirm whether the evidence addresses the issue. If a different shift handles product differently, the operator describes that arrangement too. See AFVA’s food safety document control guide for versioning and withdrawing superseded copies.

Keep an evidence gap open until it is resolved

Changing a sentence may clarify your plan. A request for validation asks for evidence that the proposed plan or process can consistently produce safe and suitable food. Ask the evaluator what evidence they need and whether a documented validation protocol is appropriate. MPI describes circumstances in which the evaluator may submit an interim report so MPI can begin considering the application. Complete validation before registration, or shortly afterwards where MPI permits it under the applicable registration decision and a protocol or procedure is supplied. Send the completed validation to your evaluator so they can complete the evaluation and provide MPI with a supplementary report. Treat an interim report as part of the application process and follow any MPI registration decision or conditions before operating under the plan.

If validation is the open item, record which product, pack, equipment and operating conditions the evidence covers. Avoid attaching a report and leaving the evaluator to guess how it relates to your process. AFVA’s HACCP validation evidence guide gives a way to organise that evidence.

Separate evaluation comments, MPI conditions and verification

The evaluator prepares a report for the registration application. MPI makes the registration decision for the custom FCP and may impose conditions, as described in section 60 of the Food Act 2014. Read the written decision and record any conditions with an owner, due date and evidence of completion. Keep any unresolved evaluator recommendations visible and confirm who needs to check them.

Once the business is registered and operating, the verifier checks how staff apply the plan, including relevant records and practices. Give staff the current procedures and forms. Keep your final plan, evaluator report, evidence index and MPI correspondence together so you can find them when needed.

Frequently asked questions

Should I send my evaluator a revised page or the whole plan?

Ask which format they prefer. Identify the version, list changes and provide a clean revised copy and any affected attachments if requested. Keep the earlier submitted version in your archive.

Can I mark an issue closed as soon as I send a reply?

Mark it submitted while it is awaiting the evaluator’s response. Record the evaluator’s disposition and any agreed follow-up once confirmed.

Can I leave all feedback until after registration?

Ask the evaluator which issues need resolution before you apply. Follow the written MPI decision and any registration conditions. Record later follow-up with the appropriate person.

Does the evaluator’s report allow me to start trading under the custom plan?

Check that MPI has registered the plan, that its registration has taken effect and that you meet the applicable conditions before you operate under it.

How AFVA can help

Contact AFVA with the product scope, plan version and the type of evaluation support you need. If another evaluator is already engaged, confirm next steps with them. AFVA will confirm whether an engagement fits its recognised scope and independence requirements.

General information only. Confirm the requirements that apply to your specific food activities, products, processes, locations and sales model.

Need Practical Food Safety Support for Your Business?

Contact us for free initial guidance. We provide practical, plain-English food safety support for New Zealand food businesses across all service areas.

This article provides general information only and is not a substitute for professional advice specific to your situation. Contact us for guidance based on your actual food activities and requirements.

More Articles