📍 Auckland, New Zealand ✉ info@foodverification.co.nz 📞 0221281203
New Zealand-wide service Free Initial Guidance →

Food Supplier Certificates of Analysis NZ: Check the Lot Before Release

08 November 2026  ·  Food Safety Audit Preparation

A food quality worker checks a report against labels on sealed ingredient containers in a receiving area.

A delivery arrives with a certificate of analysis and a green tick next to every result. Before using the material, check what the report actually covers. It may refer to another lot, an earlier specification or a test that answers a different question.

This guide is for New Zealand food manufacturers and quality teams that use supplier certificates of analysis (COAs) as part of their incoming-material controls. It focuses on the technical review of a result for a specific lot.

Quick answer. Match the certificate to the delivered ingredient and lot, then compare the reported result, units, method and sampling details with your current acceptance criteria. Where the evidence required by your release procedure is missing or contradictory, keep the affected material on hold and record who will resolve it.

Decide when a supplier COA is useful

A COA records analytical results for an identified sample or lot. A product specification sets the criteria you expect the material to meet. A food safety system certificate answers a different question about the certified site or activity.

The Codex General Principles of Food Hygiene, sections 13.2.3 and 13.2.8 describe buying ingredients to specification and verifying compliance where necessary. Testing may be done by the supplier, the purchaser or both where appropriate. Set the evidence and frequency for the material, hazard, supplier and intended use. Check any specific requirements in your applicable food safety system, legislation and customer agreement.

Use a COA alongside the normal delivery checks, such as packaging condition and temperature where relevant. The food delivery acceptance guide covers the wider receiving decision.

Match the report to the delivery and the specification

  • Match the product name, grade, supplier or production site where relevant, and the lot identifier on the packaging or traceable delivery documents. If the shipment contains several lots, check the evidence for each affected lot under your procedure.
  • Check the specification revision, test or analyte, reported result, units and acceptance limit. A statement such as “pass” is useful only when you know which requirement it refers to.
  • Where the specification calls for a particular method, reporting limit or sampling plan, check those details. “Not detected” refers to the test and portion examined. Check the stated detection limit or method interpretation where available. It does not establish zero throughout the lot.
  • Check the date, report reference and issue status. If a corrected report is issued, keep the link to the original and check what changed.

For a microbiological criterion, confirm what the criterion applies to and how many sample units are required. A single result may answer a different question from a multi-unit plan. See how to read food microbiology criteria.

Record the release, hold or escalation decision

Illustrative example. An incoming ingredient is labelled lot B42. The supplier’s PDF reports a compliant result for B24. The receiving check can still record that the packaging arrived intact, while the lot stays on hold if a matching COA is part of release. Ask for the B42 report or documented traceability that resolves the discrepancy. Keep the original report and record what evidence the authorised decision-maker accepted.

Set out how the team identifies held material physically and in its stock system, who can authorise use, and what to do if the required evidence stays unresolved. Where a result falls outside the relevant criterion, follow the product disposition and escalation procedure and assess whether material has already been used or supplied. Use supplier document reviews and audits to address recurring issues rather than treating each mismatch as an isolated paperwork error.

Put the right checks in your receiving procedure

Agree with the supplier which materials need a COA, what the document must show, when it is due and who handles corrected reports. Give staff one place to find the current specification and a clear way to stop use when required evidence is missing. Keep the report reference, lot, decision, date, decision-maker and any follow-up together so someone can reconstruct what happened.

Frequently asked questions

Do I need a COA for every delivery?

Set the requirement against the ingredient risk and the obligations that apply to your operation. A COA is one possible evidence source. Some products or agreements may specify a particular testing frequency or release condition.

Can I use a COA for a different lot?

Ask for a matching report or traceable evidence showing why the reported sample covers the lot in question. Similar product names or delivery dates alone leave the mismatch unresolved.

Can I release a lot on an email saying it passed?

Apply your written release procedure and any required test or documentation standard. If a report is required, resolve the gap with the supplier and keep the lot on hold as your procedure directs.

How AFVA can help

If supplier reports regularly arrive late, lack lot identification or use inconsistent limits, share a redacted report, the acceptance criteria and your hold-and-release procedure with AFVA. Its supplier audit and internal audit services can help review the controls and escalation process within an agreed scope.

General information only. Confirm the requirements that apply to your specific food activities, products, processes, locations and sales model.

Need Practical Food Safety Support for Your Business?

Contact us for free initial guidance. We provide practical, plain-English food safety support for New Zealand food businesses across all service areas.

This article provides general information only and is not a substitute for professional advice specific to your situation. Contact us for guidance based on your actual food activities and requirements.

More Articles