Need help with this food safety decision? Review AFVA’s food labelling review service or contact AFVA for free initial guidance.
A food brand may approve a retail carton and later discover that a distributor wants to sell the inner packs individually. That changes the question the label reviewer needs to answer. The outer artwork, each inner package and the actual sales arrangement all matter.
This guide addresses ordinary retail foods in New Zealand. Alcohol, special-purpose foods and other product-specific rules need additional checks. Start with the general AFVA food labelling checklist if the complete label requirements are still being identified.
Quick answer. Identify what the customer buys and whether an inner pack is designed for individual sale. A packaged food sold singly needs assessment under the normal retail label rules and any applicable exemptions. Individual portion packs intended for separate use, but not designed for individual sale, have their own information rule when their surface area is at least 30 cm². Review all relevant layers before printing or changing the sales format.
Map the multipack sale before reviewing its labels
Write down the intended route from manufacturer to consumer. Does a customer buy the entire multipack? Will a retailer break it into separately sold units? Are the inner packages individual servings normally removed and used separately? Is the outer carton a retail presentation or a transport package?
Standard 1.2.1 distinguishes retail sales, catering supplies and other sales. Its retail division also covers food sold as suitable for retail sale without further processing, packaging or labelling. The word wholesale on an invoice does not answer the actual food-information question.
Keep photographs or drawings of all packaging layers, their dimensions and the intended sale. Record the retailer’s proposed handling where known. This helps the reviewer assess the arrangement that will happen, including a proposed change to the route already reviewed.
Separate ordinary layers from individual portion packs
Under section 1.2.1—6(2), where the packaged retail food is required to bear a label and has more than one layer, one label is generally required for that food. Check the complete provision and product-specific requirements before using that rule for the whole design.
The same standard sets a further requirement for individually packaged servings intended to be used separately. Where those portion packs are not designed for individual sale and have a surface area of 30 cm² or greater, they also need the information required by section 1.2.1—8(3). That includes the applicable warning statements and declarations. The current standard also refers to a particular high-caffeine-coffee advisory requirement.
These are different questions. Identifying an outer layer does not settle whether a package is an individual portion pack. Ask the reviewer to document the applicable route, including relevant exceptions. Product-specific requirements may add obligations on inner or outer packaging.
Describe each packaging arrangement
Arrangement
One food with several packaging layers
Review question
Which label provides the required information for that food?
Prepare
All layers and an explanation of the retail presentation.
Arrangement
Individual portions used separately, without individual sale
Review question
Does the portion-pack rule apply, including the 30 cm² condition?
Prepare
Inner-pack dimensions, intended use and applicable declarations.
Arrangement
An inner unit offered for sale on its own
Review question
What retail label rules and exemptions apply to this sale?
Prepare
The standalone unit, sale context and complete label evidence.
Recheck the unit when the sales format changes
Suppose a hypothetical snack brand originally supplies cartons for consumers to buy as a multipack. A shop then proposes to sell one bar at the counter. Before accepting that arrangement, review the bar as the packaged food being sold. A declaration prepared only for the original carton does not establish that the new sale complies.
Check the applicable ingredient, allergen, identification, date, nutrition and storage information, including any product or package exemption. A small package can have specific provisions rather than a blanket exemption from all information. Avoid transferring the 30 cm² portion-pack condition to unrelated small-package rules.
Where new labelling is required, resolve who will supply, apply and check it. For an over-label, use the imported-food over-labelling guide as a process reference and define the actual New Zealand review scope. Confirm the relevant information before the retailer offers the unit separately.
Preserve allergen and identification information
FSANZ’s allergen labelling guidance explains how required declarations are provided and formatted. The applicable method depends on the food’s labelling situation. A consumer’s ability to see the original carton should not be assumed where the portion is taken away and used separately.
Check the required names and layout on the exact package being assessed. If several varieties share a carton, identify the correct declaration for each food. Avoid copying a single summary across variants without checking their formulations.
Keep the unit linked to its product identity, batch and relevant date information through the business’s normal tracing arrangements. The supplier name and address guide covers that particular label requirement and its scope. Required lot information and any exemption should also be assessed for the sale in question.
Make the artwork handover clear to the retailer
A useful release pack includes the following information. This is a recommended workflow for preventing an unreviewed sale-format change.
- Show each inner pack and outer layer with its actual dimensions.
- Describe which item will be sold and which portions will be used separately.
- Record the Code route and any product-specific requirements or exceptions.
- Match the label information to the correct product and recipe version.
- Identify who authorises any over-label or packaging change.
- Give the retailer clear instructions about the format reviewed.
- Keep the complete approved artwork and supporting decision.
Common mistakes include calling every internal wrapper a portion pack, treating every outer carton as retail packaging, assuming a not-for-individual-sale phrase resolves all requirements, and changing the arrangement after sign-off. Give AFVA the label review information pack with the sales-format question stated clearly.
Frequently asked questions
Does every packaging layer need the same complete label?
Standard 1.2.1 generally requires one label where a food has several layers, with further portion-pack and product-specific rules. Review the food, package and sales arrangement before deciding what belongs on each layer.
What makes an individual portion pack relevant?
Section 1.2.1—6(3) concerns individually packaged servings intended for separate use, not designed for individual sale, with a surface area of 30 cm² or more. Check its required information and any other relevant provisions.
Can a retailer sell the inner units separately?
Assess the proposed standalone sale before proceeding. The packaged food must meet the retail information requirements applying to that sale, including any genuine exemption. The original multipack review alone does not establish that result.
Does a tiny package remove all information duties?
Check the specific provision. Package-size rules apply to particular requirements and use particular conditions. A threshold from one rule should not be used as a general exemption from all labelling.
Are alcoholic beverages covered by this checklist?
They need additional product-specific review, including relevant alcohol and pregnancy-warning requirements. Other special-purpose foods can also have extra rules. Identify the food category in the initial brief.
What should I send for a multipack review?
Send complete artwork and dimensions for each layer, the product formulations and declarations, and a description of how the units will be sold and used. Identify any retailer request to change the current arrangement.
How AFVA can help
Ask AFVA to review the proposed multipack and individual-unit sale together. Supply all artwork layers, dimensions, formulations and retailer instructions before printing or changing the sale format. AFVA can identify possible compliance gaps and recommendations within the agreed labelling scope.
General information only. Confirm the requirements that apply to your specific food activities, products, processes, locations and sales model.
Need Practical Food Safety Support for Your Business?
Contact us for free initial guidance. We provide practical, plain-English food safety support for New Zealand food businesses across all service areas.
This article provides general information only and is not a substitute for professional advice specific to your situation. Contact us for guidance based on your actual food activities and requirements.