📍 Auckland, New Zealand ✉ info@foodverification.co.nz 📞 0221281203
New Zealand-wide service Free Initial Guidance →

IANZ Food Testing Accreditation: How to Read a Laboratory’s Scope Schedule

11 November 2026  ·  Testing & Shelf Life

Laboratory specialist reviews sample details beside sealed food sample containers at a receiving counter.

Need help with this food safety decision? Review AFVA’s food safety and quality consulting or contact AFVA for free initial guidance.

An IANZ certificate identifies an accredited laboratory. The schedule that accompanies it tells you what work the accreditation covers. If your test is already specified, use the schedule to check that the quoted site, food and method match. For help deciding what to test in the first place, see AFVA’s food testing guide.

Quick answer. Get the current accreditation schedule for the facility that will do the work. Match the type of food, what the test measures and the proposed method to the scope. Confirm the quoted reporting limit and how the result will be reported. Where the relevant authority or customer requires a recognised laboratory or a particular method, confirm that requirement separately.

Read the accreditation schedule for the facility

Use the IANZ directory of accredited facilities to find the organisation, testing location and schedule. Check the organisation and location on the certificate or schedule against the site named on the quote. A sample drop-off point can differ from the laboratory that performs the analysis. Check the current directory entry before booking and record the schedule reference and the date checked. IANZ says many schedules have no expiry date and can be removed if accreditation is suspended.

An IANZ-issued biological testing schedule dated April 2026 illustrates the layout. Page 9 groups tests under food classes. It also lists plant hygiene evaluation separately. Use this PDF to see the format and the directory to confirm a facility’s current scope. IANZ’s chemical testing programme and biological testing programme explain how scopes can be classified by sample type, test and method.

Work through a fictional scope mismatch

Suppose a customer specification calls for a quantitative sodium result on a finished oil-based dressing and names Method S1. The quote says “sodium, Method S1”, with drop-off at Site A and testing at Site B. The site names and method codes below are fictional and give no advice on the method to use.

  • Site A schedule. Food class: oils and oil-based foods. Test: sodium. Method: S1. This matches the requested test and food, but Site A only receives this order.
  • Site B schedule, first entry. Sample class: drinking water. Test: sodium. Method: S1. This matches the measurement and method, but the listed sample is different.
  • Site B schedule, second entry. Food class: oils and oil-based foods. Test: sodium. Method: S2. This matches the food and measurement, but uses a different method from the one the customer named.

Ask the laboratory to point to the scope entry for Site B and clarify how it classifies your exact dressing. If it proposes S2, get the customer’s decision on that method before booking. If the laboratory proposes another site or a subcontractor, repeat the scope check for the place that will perform the test. Confirm reporting units and limit separately. For example, a report of “less than 10 mg/kg” would not establish that a sample meets a fictional 5 mg/kg maximum.

Check whether a second approval or recognition applies

General laboratory accreditation and approval for a specific regulatory purpose are separate checks. IANZ’s MPI Recognised Laboratory Programme explains the programme for specified testing under the Animal Products Act 1999. Use the MPI food safety registers and lists to find the relevant programme register. Confirm the exact required scope with the applicable regulator, customer or scheme before commissioning work.

Avoid treating a research or development result as automatically suitable for a formal decision. The receiving party can have specific requirements for the laboratory, the sampling plan, the method or the report. Write down who will use the result and what they expect to receive.

Compare quotes and confirm the handover

Ask each provider to quote for the same deliverable. Record the testing facility, method, accreditation or recognition status, sample handling requirements, reporting units and limits, turnaround and total cost. If results will go to a third party, confirm what the final report will identify about the sample and the work completed. Ask who will explain an unexpected result or a change in method before you commit.

Once you choose the lab, agree the sample identifiers, packaging, transport conditions and receipt checks. Use AFVA’s food sampling chain-of-custody guide to plan that handover. Keep the quote, scope check, submission form and final report together so a reviewer can trace the decision.

Frequently asked questions

Can one laboratory quote contain accredited and non-accredited tests?

It can. Ask the provider to confirm the status of each quoted test and how that status will appear on the report. Check the requirements of the person or authority that will use each result.

Is the nearest sample drop-off the accredited testing facility?

It may be only a receiving point. Confirm which facility performs the work and check that facility’s current scope for the relevant test and sample type.

Does a result below the reporting limit mean the substance is absent?

It means the laboratory reported the result below its stated limit for that sample and method. Check whether the limit is suitable for the decision you need to make.

How AFVA can help

Bring your product description, proposed test, intended decision, specification and any laboratory quotes. AFVA can help you clarify the testing question, review available evidence and organise a suitable brief. An appropriate external laboratory performs the analysis.

General information only. Confirm the requirements that apply to your specific food activities, products, processes, locations and sales model.

Need Practical Food Safety Support for Your Business?

Contact us for free initial guidance. We provide practical, plain-English food safety support for New Zealand food businesses across all service areas.

This article provides general information only and is not a substitute for professional advice specific to your situation. Contact us for guidance based on your actual food activities and requirements.

More Articles