Need help with this food safety decision? Review AFVA’s HACCP consulting and food safety plan support or contact AFVA for free initial guidance.
Outsourced food processing can leave a gap between two otherwise well-organised sites. Your business sends an intermediate product away for a defined operation, then receives it back for further work. Each site may keep its own records while neither has the complete evidence needed for the next decision.
This guide helps New Zealand manufacturers plan that specific handover. It covers the connection between the food sent, the operation performed and the returned batch. For the broader decision about choosing a manufacturer and agreeing the commercial relationship, use AFVA’s food contract manufacturing guide.
Quick answer. Show the outsourced step and both transfers in the process flow. Agree the product and control requirements, who monitors them, which evidence travels with each batch and who decides whether returned stock can be used. Link the sending and receiving identifiers, plan how deviations are reported, and check the full arrangement before relying on the next run.
Start with one defined step and the food it handles
Describe exactly what leaves your control, where it goes, what happens there and what returns. Identify the product version, intermediate state, packaging, intended next step and any storage or transport conditions that matter. A purchase order saying only ‘process as usual’ leaves the technical boundary unclear.
The Codex General Principles of Food Hygiene, section 19.4, includes outsourced processes in the flow diagram. Its guidance also covers inputs, rework, outputs and linked modules for complex operations. Use the real sequence, including dispatch, external holding and return, as the basis for assessing hazards. Codex supplies technical guidance. Your applicable New Zealand programme, scheme and customer requirements still need to be identified.
Check the supplier’s approved site and process scope against the specific operation. Describe the actual work in the agreement and confirm any applicable registration or plan arrangements with the appropriate people. A familiar supplier name cannot settle those scope questions.
Agree the control and evidence handover
For each relevant hazard, identify where control is achieved and what the other site needs to know before continuing. Consider transport, intermediate storage, the outsourced operation and any handling after it. Review whether the existing control evidence applies to this product and the conditions actually proposed.
Agree a practical handover record with the processor. The following fields are an AFVA recommendation for organising the discussion. They are not a prescribed national form. Use AFVA’s HACCP validation evidence guide where the question is whether a control has an adequate technical basis.
Decisions and supporting evidence
Handover area
Food and process scope
Agree before use
Product version, operation, site, relevant conditions and permitted variations.
Evidence to link
Controlled specifications and applicable technical support.
Handover area
Monitoring and departures
Agree before use
Who checks the control, what is recorded and who receives an urgent deviation report.
Evidence to link
Actual batch monitoring and any corrective-action records.
Handover area
Return and use
Agree before use
Which records are needed on return and who can decide the stock status.
Evidence to link
Processor batch reference, returned quantity and the documented receiving decision.
Keep the batch identity through the round trip
Connect your dispatch lot to the processor’s intake and processing references, then to the returned containers. If one dispatch is split into several runs or several lots are combined, make the links explicit. Record the quantities and relevant losses or remaining stock so the batch history can be reconstructed.
Ask how rework, partial returns, delayed consignments and stock still held at the processor will be identified. Agree which identifiers appear on the physical containers and documents. Test whether a receiving person can match them without relying on the project manager’s memory.
Returned stock may need a clear status while required evidence is checked. Arrival, unloading and recording receipt are separate events from deciding that the food can enter the next process. Make the status visible in both the stock record and the place where staff select materials.
Decide how missing records and deviations will be handled
Name the people authorised to make technical decisions at both sites, with cover when they are absent. Agree how urgently each type of issue needs escalation under the applicable system, and how affected food is controlled while the question is resolved. A routine end-of-month report may arrive too late for a decision needed before tomorrow’s production.
Codex sections 19.9–19.11 connect monitoring, corrective action, verification and records. Where a CCP deviation occurs, its guidance calls for control to be restored and potentially affected food to be identified and assessed. Define how the two sites will share the relevant evidence, rather than treating a later statement that the machine is working as the full answer.
Section 14 of the Food Act 2014 requires a person trading in food to ensure it is safe and suitable. An agreement allocating tasks should support each business’s duties. It cannot establish that a particular batch is acceptable when the required evidence is missing.
Walk a hypothetical batch through the arrangement
Example only. A manufacturer sends intermediate lot IN-42 to an approved processor for one defined step. The processor assigns run P-76 and returns containers marked P-76. The delivery note names the product but omits the link to IN-42 and the agreed control-record reference.
The receiving team records the actual return and keeps its status clear while the two sites resolve those gaps. They obtain the lot mapping and relevant processing evidence, then the authorised person records the decision under the applicable procedure. The example demonstrates a record connection. It supplies no processing conditions or approval for an actual food.
Before the first run, use a document walkthrough to find missing links like these. Then review what actually happened during implementation, including any differences from the agreed arrangement.
Use a short readiness checklist before dispatch
- The process flow includes the external operation and both transfers, with the relevant inputs and outputs.
- The product, operation, site and supporting control evidence match the agreed scope.
- Batch identity, quantities, partial returns and rework remain traceable across both systems.
- Monitoring evidence and deviation reporting reach the responsible people when needed.
- Returned stock has a clear status until the required checks and decisions are complete.
- Changes to the product, process, site or information requirements trigger the agreed review.
Common problems include showing only the steps inside your own factory, accepting a generic certificate as the batch record, and leaving release authority to an informal assumption. Resolve the interface in the operating instructions and supplier agreement together. AFVA’s flow-diagram checking guide can help organise the process description.
Frequently asked questions
Does every outsourced step have to be a CCP?
Determine the controls from the hazard analysis and applicable requirements. Outsourcing alone does not classify the step. The assessment needs to show where relevant hazards are controlled and how that conclusion is supported.
Can each site keep its own HACCP documents?
The documents can reflect each site’s operation, but the interface needs to connect them. Agree the relevant control information, monitoring evidence, batch links and reporting so the receiving business can make its required decisions.
Is the processor’s certificate enough for each returned batch?
A certificate can support supplier assurance within its scope. It does not supply every batch identifier, control record or deviation decision your agreed return procedure may require.
What if an urgent return arrives without its records?
Apply the agreed stock-status and escalation procedure. Identify the actual gap and the person authorised to resolve it. Production urgency does not create evidence that was not supplied.
Who should review a proposed processor change?
Involve the people responsible for the product, process and food safety system at both sites. Identify any separate programme, authority or scheme process that applies before relying on the changed arrangement.
Can AFVA approve the processor or release the batch?
AFVA can help review the HACCP interface and supporting documentation within an agreed consulting scope. Supplier approval, product disposition and any formal regulatory decisions need their own defined authorities and evidence.
How AFVA can help
Send AFVA the flow diagram, outsourced-step specification, sample dispatch and return records, and the decision that is unclear. A focused HACCP review can identify missing connections and practical documentation changes. Agree any specialist input and independence requirements when defining the consulting work.
General information only. Confirm the requirements that apply to your specific food activities, products, processes, locations and sales model.
Need Practical Food Safety Support for Your Business?
Contact us for free initial guidance. We provide practical, plain-English food safety support for New Zealand food businesses across all service areas.
This article provides general information only and is not a substitute for professional advice specific to your situation. Contact us for guidance based on your actual food activities and requirements.