Need help with this food safety decision? Review AFVA’s food labelling and nutrition panel review or contact AFVA for free initial guidance.
A concentrated food can have different nutrition values before and after preparation. A food packed in liquid can also have different values when the liquid is removed. Before sending artwork to print, decide exactly what your nutrition information panel (NIP) describes and check that the figures, serving size and directions all use that basis.
Quick answer. Read the proposed directions first. Standard 1.2.8 has separate provisions for foods labelled for reconstitution with water, foods labelled for draining, and foods intended to be prepared or eaten with another food. If you make a nutrition or health claim, check the claim basis separately under Standard 1.2.7.
Choose the basis from the label directions
Start by checking whether the product requires a panel. AFVA’s guide to nutrition panel exemptions addresses that separate decision. For a product with a panel, section 1.2.8–6 of the Australia New Zealand Food Standards Code sets the general requirements, including average serving quantity and required nutrition values per serving and per unit quantity. Sections 1.2.8–11 to 1.2.8–13 address specific preparation instructions.
- Reconstituted with water — If the package label indicates that the product should be reconstituted with water before consumption, section 1.2.8–11 requires the information to be expressed as a proportion of the reconstituted food.
- Drained before consumption — If the labelling directs the consumer to drain the food, section 1.2.8–12 requires the information to be expressed as a proportion of the drained food. The panel must clearly say that it relates to the drained food.
- Prepared or consumed with another food — When the labelling indicates this intended use, section 1.2.8–13 permits an extra right-hand column for the combined foods. When a claim requiring nutrition information is made about the food, the section requires the combined column and the weight or volume of the prepared serving. The column identifies the additional food and amount and reports the combined energy and applicable quantities.
Keep the food form, serving and numbers aligned
Write down the exact amount of water or other food specified in the directions, the final weight or volume and the serving basis. A manufacturer’s pack weight and the amount the consumer eats can describe different things. The evidence for drained food should relate to the drained portion. For combined foods, document the type, amount and nutrient-data source for the added food.
Illustrative calculation — A hypothetical powdered dessert prepared with water as directed yields 150 g of semi-solid food. If that prepared batch contains 180 mg sodium, it contains 120 mg sodium per 100 g. If the whole prepared batch is one serving, the amount per serving is 180 mg. These are example values, not recommended product or serving specifications. Check actual yield, units and nutrient evidence before using the figures on artwork.
A calculation, appropriate external analysis or both may be useful depending on the product and the evidence needed. If commissioning analysis, specify the form the laboratory should receive or prepare. AFVA’s nutrition analysis laboratory brief explains how to communicate the formulation and evidence required.
Check the claim separately from the panel
Standard 1.2.7 sets the form to use for the claim conditions. Section 1.2.7–7 distinguishes food that can be eaten as sold or prepared with other food, food required to be prepared according to directions, and food requiring reconstitution with water or draining. For a nutrition content claim, section 1.2.7–11 also requires an accompanying statement of the form when it differs from the food as sold.
For example, a topping that can be eaten straight from the packet or sprinkled onto yoghurt uses the as-sold form for the claim conditions under section 1.2.7–7(a). The prepared-combination column is a separate question under section 1.2.8–13. Check both the proposed wording and the full label before relying on a claim. AFVA’s protein claims guide explains the specific evidence questions for those claims.
Run a preprint check
Place the final directions, panel, artwork proof and evidence file side by side. Check that the same formulation, serving, units, added-food description and pack variant appear in each. Pay particular attention to copy carried over from an overseas label or a different size. If a direction changes after the panel was calculated, resolve which figures and claims need to be revisited before signing off. Keep the signed-off proof and evidence together for future label changes.
Frequently asked questions
Can I print only the dry weight figures on a powder that is labelled for reconstitution with water?
If section 1.2.8–11 applies, the required panel information has to be expressed as a proportion of the reconstituted food.
Is a drained weight statement enough to show which values the panel uses?
Where section 1.2.8–12 applies, make sure the panel itself clearly indicates that the information relates to the drained food. A pack quantity elsewhere and the basis of the panel are separate checks.
Does a recipe suggestion always mean I need a second column?
Review the exact labelling and whether section 1.2.8–13 applies. Where it applies, the combined column is permitted. A claim requiring nutrition information about the food triggers the combined column and prepared serving weight or volume requirements in that section.
How AFVA can help
Share your proposed directions, panel, pack size, nutrition calculations or laboratory report and exact claim wording with AFVA. A labelling review can identify discrepancies between the panel, evidence and artwork before printing. An appropriate external laboratory performs any analysis needed.
General information only. Confirm the requirements that apply to your specific food activities, products, processes, locations and sales model.
Need Practical Food Safety Support for Your Business?
Contact us for free initial guidance. We provide practical, plain-English food safety support for New Zealand food businesses across all service areas.
This article provides general information only and is not a substitute for professional advice specific to your situation. Contact us for guidance based on your actual food activities and requirements.